Select subsidiary

You are attached to the subsidiary: France

Languages available

Loading a MEWP correctly: safe working load and golden rules

Loading a MEWP correctly: safe working load and golden rules

Two
Every aerial work platform, whatever its type, has a maximum load that must never be exceeded. Poor loading, overloading or an unsecured load can lead to serious injury or death. Here is how to load your mobile elevating work platform (MEWP) safely.

What is the safe working load of a MEWP?

The safe working load (SWL) is the maximum load the MEWP can carry safely. It covers the combined weight of the operators, their tools and the materials in the platform.
 
The manufacturer sets the safe working load and the maximum number of people allowed in the platform. Before starting work, check them on the load chart decals on the machine and in the operator's manual.

Two operators working at height with their tools in the basket of a Haulotte HA16 E boom lift

The golden rules for loading a MEWP safely

  • Weigh everything that goes into the platform, so the total stays below the rated capacity of the MEWP.
  • Keep materials off the extensions: they are designed for operators and their tools only.
  • Do not rest or lean loads on the guardrails.
  • Keep materials and tools inside the platform, never sticking out beyond its edges.
  • Spread the load evenly across the platform.
  • Keep the platform tidy to limit the risk of objects falling.
  • Secure the load so that it stays within the platform.
  • Allow for the wind with loads that have a large surface area.
  • Never disable the overload system. If the overload alarm goes off, remove the excess load immediately, where possible before trying to recover the machine.
  • Make sure operators can handle the materials safely.
  • Use additional lifting equipment to bring materials to the work position when needed.

Why is overloading a MEWP dangerous?

Loading people and equipment is a critical task. Exceeding the safe working load can cause the machine to overturn, or damage it.
 
A sudden increase or decrease in weight is also extremely hazardous, and a load spread unevenly across the platform can destabilise the machine.
 
Always follow the load chart and the manufacturer's instructions for the intended use of the machine.

ISO Certified 9001/14001/45001

Global solutions provider

Sustainability focussed

Experience maker